EnvirofleX - Cellulose, Insulation Products, Home Insulation, Polyester Batts, Melbourne, Retrofit Walls, Retrofitting insulation , Melbourne

Insulation Products

»	Cellulose Fibre
	Cellulose Fibre is an Enviromentally Friendly thermal insulation.

»	Cellulose Sealant
	Enviroflex is the only insulation company in Victoria offering this product.

»	Polyester Batts
	Suited for wall and ceiling cavity installation

»	Foil Batts
	Breathes with air spaces that remain effective in high humidity.

»	Therma Board
	Main use in walls and cathedral ceilings

»	Wall Wraps
	Allows construction to continue even if brickwork or outer cladding nor completed

»	Untreated Paper Products
	Enviroflex has been a leader in the manufacture and supply of paper products

»	Rockwool Wall Cavity Insulation - For New & Existing Constructions
	Rockwool Wall Cavity Insulation For new & existing constructions

»	Tenmat Downlight Protection Cover
	Developed to reduce the risk of fire caused by the overheating of downlights

»	NEW Celbar SprayOn
	~Acoustic SprayOn Solutions~

»	NEW K-13 SprayOn
	~Acoustic SprayOn Soltuions~

»	NEW SonaKrete Premium SprayOn
	~Acoustic SprayOn Solutions~

»	Draft Stoppa
	Draft Stoppa is an inexpensive self sealing casing for ceiling exhust fans.

BUY ONLINE POLYESTER BATTS

CLICK FOR TECHNICAL DATA SHEET

OUR CONTACT DETAILS

1 Forbes Close, Knoxfield, VIC 3180
Phone: +61 (03) 9753 3811
Fax: +61 (03) 9753 3822
Email: enviro@enviroflex.com.au

Postal Address
P.O. Box 274, Ferntree Gully, VIC 3156

Buy Polyester Batts Online

Product Description
Polyester Thermal Batts are lightweight products manufactured from thermally bonded polyester fibre, with a high percentage of recycled fibres. As well as being manufactured to comply with AS/NZS 4859.1, Polyester Thermal Batts are non-toxic and user friendly insulation, requiring no specific protective clothing. Polyester Thermal Batts will not corrode or deteriorate over time. The products are white in colour. Physical properties and material safety data can be found on the Polyester Bonded Polyester Products MSDS.

Applications
Polyester Thermal Batts have been designed to provide a safe and efficient thermal and acoustic insulation for the Australian home owner. Polyester Thermal Batts are ideal for use in walls, ceilings and between floors and correctly installed will improve energy efficiency and reduce greenhouse gas emissions.

To start shopping please choose from the product range below by entering the quantity

CEILINGS
R Value	Rafter Width	Coverage	Price Per Pack	Qty
3.0	430 mm	4.65 m²	$38.70
3.0	580 mm	6.20 m²	$50.20
3.5	430 mm	3.50 m²	$35.10
3.5	580 mm	4.65 m²	$45.95
4.0	430 mm	2.30 m²	$32.00
4.0	580 mm	3.10 m²	$43.15
WALLS
R Value	Rafter Width	Coverage	Price Per Pack	Qty
1.5	430 mm	9.29 m²	$38.70
1.5	580 mm	12.40 m²	$52.65
2.0	430 mm	6.96 m²	$40.50
2.0	580 mm	9.30 m²	$53.85
(All prices inclusive of GST)

General Installation Advice
Polyester Thermal Batts are safe and easy to install in the walls and ceiling. Batts are supplied in two widths to suit standard housing construction, this being 430mm widths for 450mm centres and 580mm for 600mm centres. As the batts are safe and soft, Polyester Thermal Batts are easily torn or cut with a pair of industrial scissors or shears. Off cuts can be used to fill corners crevices and gaps, eliminating any waste. For ceilings, Polyester Thermal Batts are installed by laying them on top of the ceiling between the ceiling joists. A 50mm gap should be allowed around flue pipes, ceiling fans and 200mm gap around recessed lights. For walls, the Batts are placed between the wall studs before the plasterboard is put in place. If required, lightly staple or tape insulation into position. No special clothing, gloves or masks required for installation. Allow up to one month for products subjected to compression packing to recover to nominal thickness.