Insulation Products
»
 
Cellulose Fibre is an Enviromentally Friendly thermal insulation.
»
 
Enviroflex is the only insulation company in Victoria offering this product.
»
 
Suited for wall and ceiling cavity installation
»
 
Breathes with air spaces that remain effective in high humidity.
»
 
Main use in walls and cathedral ceilings
»
 
Allows construction to continue even if brickwork or outer cladding nor completed
»
 
Enviroflex has been a leader in the manufacture and supply of paper products
»
 
Rockwool Wall Cavity Insulation For new & existing constructions
»
 
Developed to reduce the risk of fire caused by the overheating of downlights
»
 
~Acoustic SprayOn Solutions~
»
 
~Acoustic SprayOn Soltuions~
»
 
~Acoustic SprayOn Solutions~
»
 
Draft Stoppa is an inexpensive self sealing casing for ceiling exhust fans.
OUR CONTACT DETAILS
1 Forbes Close, Knoxfield, VIC 3180
Phone: +61 (03) 9753 3811
Fax: +61 (03) 9753 3822
Email: enviro@enviroflex.com.au

Postal Address
P.O. Box 274, Ferntree Gully, VIC 3156
Technical Data Sheet

Product Description
Consumers both commercial and domestic have very good and sound reasons to specify polyester insulation, as much of the raw materials used in the manufacture is recycled material P.E.T. No gloves, masks or boiler suits required to handle our range of products.

Quality Assured: Auspoly products are made to the highest standards.

Product
Size
Thickness (mm)
Density Kg/M3
R Value
A20/25
Non Standard
25
20
0.60
A20/50
Non Standard
50
20
1.16
A20/75
Non Standard
75
20
1.74
A20/90
Non Standard
90
20
2.10

Sound Absorbtion
 
Freqency (Hz)
 
125
250
500
1000
2000
4000
NRC
A20/25
0.17
0.30
0.45
0.55
0.62
0.67
0.50
A20/50
0.27
0.54
0.74
0.85
0.88
0.87
0.70
A20/75
0.35
0.60
0.85
0.95
0.90
0.95
0.82
A20/90
0.50
0.86
1.00
1.00
0.95
1.00
0.95

Thermal Rating: A20/75 R1.5+, A20/90 R2.0+
 

Physical Description
Can be manufactured in various different colours, sizes, shapes, thickness and densities. It may be rigid or flexible with facings such as aluminium foil applied to one or both sides to meet specific applications.

Melting Point: 250c, Maximum Service Temp: 150c,
Flamability: Complies with the building code of Australia

Fire Resistance:
When tested in Accordance to AS1530 Part 3. Auspoly Products meet all the requirements.
Ignitability Index
0
Range 1 - 20
Spread of Flame Index
0
Range 1 - 10
Heat Evolved Index
0
Range 1 - 10
Smoke developed Index
0 - 1
Range 1 - 10

Moisture Absorbtion: Exposed to an atmosphere of 50c, 90% RH for four days gives moisture absorption of less than 0.03% by volume.

Ingredients: Organic, Long Chain Synthetic Polymer
Chemical Entity: Composed of Carbon-Hydrogen Oxygen, Alkalinity: Ph 7.8
Corrosiveness: The product is not classified as corrosive, Percent Volatiles: Nil
Site by Aussie Internet
  
The Australian Cellulose Insulation Manufacturers Association